How To Make A Plumeria Lei? Step By Step Guide - Plumeria Guy (2024)

Have you ever wanted to make a beautiful Hawaiian plumeria lei? It’s not as difficult as you might think! In this blog post, we’ll walk you through the steps of how to make your own plumeria lei. First, you’ll need to gather some supplies. You’ll need plumeria flowers, scissors, and string. You’ll also need a needle if you want to add beads to your lei. Once you have your supplies, you’re ready to start creating! Follow the instructions in this blog post, and soon you’ll have a beautiful Hawaiian plumeria lei of your very own!

What is a Plumeria Lei?

A Plumeria Lei is a beautiful and fragrant Hawaiian lei made from the Plumeria flower. The Plumeria flower is native to Central America but has been transplanted to Hawaii, where it has become a symbol of the islands. The Plumeria flower has a sweet fragrance that is said to be similar to the smell of frangipani.

How to Pick Quality Plumeria Flowers for a Lei

When picking plumeria flowers for a lei, it is important to choose blooms that are fresh and free from blemishes.

Look for flowers that have vibrant colors and are still tightly closed. Avoid any that are wilted or have brown edges.

To ensure your lei lasts as long as possible, it is best to use flowers that have been recently picked. If you cannot find any fresh blooms, look for ones that have been kept in cool storage. These will typically have a longer shelf life than those that have been sitting out at room temperature.

How To Make A Plumeria Lei? Step By Step Guide - Plumeria Guy (1)

What You’ll Need

-A plumeria plant
-Scissors
-Twine or string
-Ruler or measuring tape

To make a plumeria lei, you’ll need a plumeria plant, scissors, twine or string, and a ruler or measuring tape.

Once you have selected your flowers, it is time to start stringing them onto the lei. Begin by threading the needle with a length of thread or dental floss. Then, gently push the needle through the base of each flower, being careful not to damage the petals. Tie a knot at the end of the thread to secure the final flower in place.

Directions

Assuming you would like Plumeria lei instructions:

Step 1: Cut the stem of the plumeria at an angle about 1-2 inches from the base of the flower. This will allow the stem to drink in more water and help keep your lei fresh longer.

Step 2: Remove any leaves that will fall below the waterline in your container. Again, this will help your lei last longer.
Fill a clean container with cool water and add a floral preservative according to the package directions.

We like to use Crystal Clear Flower Food because it comes in convenient single-use packets perfect for one lei.
Place plumeria flowers in the water, angling them down into the water so they can drink.

Step 3: Allow flowers to hydrate for several hours before using or storing them in a cool dark place until you’re ready to use them.

Step 4: To create your lei, string plumeria on either a monofilament line or beading wire using a needle. If you are using monofilament, knot between each blossom leaving about 6 inches between knots.

This will ensure that your lei lays flat when worn. If you are using beading wire, thread each blossom and then twist the wire closed behind the blossom trapping it on the wire. Continue adding blossoms until the lei reaches the desired length.

Step 5: Finish by knotting the end of the line or wrapping wire around itself several times so it doesn’t come undone.

Tips & Tricks

-To make a plumeria lei, first choose your flowers. Plumeria comes in many colors, so pick the ones that you like best.

-Next, cut the stems of the plumeria to about six inches long.

-Thread the plumeria onto a string or thread, using a needle if necessary. You can space the flowers however you like, but generally, they should be about an inch apart.

-Once all of the flowers are on the string, tie the ends together to form a loop. Hang the lei around your neck and enjoy!

How to Make Hawaiian Lei Garland Plumeria

Making a Hawaiian lei garland plumeria is easy and only requires a few supplies. You will need:

– Hawaiian Plumeria flowers
– Floral wire
– Scissors
– Tape measure

To make your own Hawaiian lei garland plumeria, follow these steps:

1. Cut the stems off of the plumeria flowers, leaving about 3 inches of stem.

2. Using the floral wire, create a loop at one end and then thread the stem of the flower through the loop. Pull the wire tight so that the flower is secure. Repeat this step for each flower.

3. Once all of the flowers are on the garland, measure it to your desired length and cut off any excess wire.

4. Hang your beautiful Hawaiian plumeria garland and enjoy!

How Do You Make A Spiral and Double Plumeria Lei?

To make a spiral plumeria lei, you will need:

-1 hula needle
-2 yards of clear beading thread
-1 spool of green floral wire
-scissors
-tape measure
-ruler or yardstick
-40 Plumeria flowers

Instructions:

1. Cut the green floral wire into four equal pieces using the scissors. Set two pieces aside for later.

2. Take one piece of wire and bend it in half to create a loop. This will be the top part of your lei.

3. String the flowers onto the wire, spacing them evenly. Once all the flowers are on, twist the wire to secure them in place.

4. Make a second loop at the bottom of the lei, similar to the first one.

5. Take the remaining two pieces of wire and wrap them around both loops, spiralling downwards. Secure the wires in place with tape or by twisting them together.

6. Cut a length of beading thread twice as long as you want your lei to be. Thread it through the hula needle and tie a knot at one end.

7. Starting at the top loop of your lei, weave the thread in and out through each flower, going over and under alternately until you reach the bottom loop.

8. Tie off the end of the thread and trim any excess.

Conclusion

Making a plumeria lei is a fun and easy project that anyone can do. All you need are some basic supplies and a little bit of time, and you’ll have a beautiful lei to show off. We hope our tutorial has given you all the information you need to get started on your own plumeria lei. If you have any questions or comments, please feel free to leave them below.

How Do You Make A Spiral Plumeria Lei? Video

Related Posts:

  • What To Fertilize Plumeria With? 7 Best Fertilizers
  • Plumeria Botanical Facts and Characteristics
  • Plumeria Seed Pods: A Complete Guide
  • How To Propagate Plumeria In Water? 5 Easy Steps Guide
  • How Fast do Plumeria Grow? Plumeria Growth Cycle
  • Is Plumeria A Succulent or Flower?
How To Make A Plumeria Lei? Step By Step Guide - Plumeria Guy (2024)
Top Articles
Latest Posts
Article information

Author: Greg O'Connell

Last Updated:

Views: 5837

Rating: 4.1 / 5 (42 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Greg O'Connell

Birthday: 1992-01-10

Address: Suite 517 2436 Jefferey Pass, Shanitaside, UT 27519

Phone: +2614651609714

Job: Education Developer

Hobby: Cooking, Gambling, Pottery, Shooting, Baseball, Singing, Snowboarding

Introduction: My name is Greg O'Connell, I am a delightful, colorful, talented, kind, lively, modern, tender person who loves writing and wants to share my knowledge and understanding with you.